Floor graphics that turn your floor into a sign.
Slip-resistant logo, directional, and safety graphics for retail floors, events, and facilities across Northern Indiana / Michiana — designed and proofed in-house, then installed flat and clean on the surface you already walk on every day.
What it is
The most-walked-on space you own.
A floor graphic is printed film, sealed under a slip-resistant laminate and applied straight to the floor. It's one of the few brand surfaces people look at without being asked — at the entry, in a checkout line, on a trade-show floor, or marking a lane in a warehouse. We design each piece in-house and proof it in context before anything is printed or cut. Floors are part of our wider environmental & architectural graphics.
What we make
Branded, directional, and built to take traffic.
From a single welcome decal to a full set of safety and wayfinding markings — every floor graphic ships with a slip-resistant laminate.
Logo & Welcome Decals
Put your brand right where people are already looking. A logo at the entry, a welcome mat printed straight onto the floor, or a feature graphic in the middle of a showroom — the first thing customers see when they walk in.
- Entry & lobby logo decals
- Printed welcome mats
- Showroom feature graphics
- Branded waiting-area floors
- Round, custom-cut & full-shape decals
Directional & Wayfinding Markers
Move people through a space without a word from staff. Arrows, lane markers, and queue lines guide foot traffic, point to checkout or pickup, and keep a busy floor orderly during peak hours.
- Directional arrows & lane markers
- Queue & line-up guides
- Checkout, pickup & exit paths
- Aisle & department markers
- Spacing & flow graphics
Safety & Zone Messaging
Make the floor do the warning for you. High-visibility safety graphics and zone markings call out hazards, mark restricted areas, and reinforce procedures in warehouses, shops, and back-of-house spaces.
- Caution & hazard graphics
- Restricted & staff-only zones
- PPE & procedure reminders
- Equipment & forklift lanes
- High-visibility floor markings
Event & Promotional Graphics
A short-run floor takeover for a launch, a sale, or a trade-show booth. Printed to land hard for the run of the event, then peel up clean when it's over — no residue left behind on the floor underneath.
- Trade-show & booth floors
- Sale & seasonal promotions
- Sponsor & step-on activations
- Pop-up retail floor branding
- Clean-removal short-run graphics
Materials & finishes
Slip-resistant by default.
Floors take a beating that walls and windows never see, so the film and laminate are built for it — traction underfoot, an adhesive matched to your surface, and a clean lift when the graphics come up.
Slip-resistant laminate
Every floor graphic is finished with a textured, slip-resistant over-laminate — the key difference from wall or window film. It gives traction underfoot and protects the print from the scuffs and traffic a floor takes.
Floor-rated print film
We print on durable film built for horizontal surfaces, with an adhesive that grips the floor and holds through daily cleaning and foot traffic.
Surface-matched adhesive
Sealed concrete, polished tile, vinyl plank, and short-pile commercial carpet each ask for a different film. We match the adhesive to your actual floor so it sticks where it should and lifts cleanly when it's time.
Permanent vs. temporary
Long-run graphics for a retail or facility floor are built to last; event and promotional pieces are matched to a realistic, shorter lifespan and a clean removal — we tell you straight which you're getting.
How we work
Three steps, proofed in context.
From a bare floor to finished graphics — you see it placed before we print, and we install around your hours.
Design & Proof
We measure the floor and the traffic pattern, design the graphics in-house, and show you a proof in context before anything prints — sized and placed for the way people actually move through the space.
Production
We print on floor-rated film and finish it with a slip-resistant laminate matched to your surface and how long the graphics need to last.
Install
We clean and prep the floor, then apply each graphic by hand with firm, even pressure so the edges seal down flat — installed around your hours, with minimal disruption.
Who it's for
For floors that work as hard as you do.
Retail entries, event booths, warehouse lanes, and lobbies — anywhere foot traffic moves through. See more by industry on our industries page.
Retail & Restaurants
Entry logos, promotional takeovers, and directional graphics that catch the eye at floor level and steer foot traffic toward the sale or the counter.
Events & Activations
Short-run booth floors, sponsor graphics, and step-on activations that go down fast for a show or launch and peel up clean when it's over.
Warehouses & Facilities
Safety markings, equipment lanes, and zone messaging that keep a working floor organized and reinforce procedures where it counts.
Offices & Venues
Lobby logos, wayfinding paths, and branded floors that make a space feel finished and guide guests without a single staff direction.
FAQ
Durability, surfaces & removal.
How durable are floor graphics — how long do they last?
It depends on traffic. In a moderate-traffic retail or lobby setting, a floor graphic with a slip-resistant laminate typically holds up for many months to a year or more. In a high-traffic entry or a busy warehouse lane it wears faster. Event and promotional graphics are built for a short run by design. We match the film and laminate to your floor and tell you a realistic lifespan up front.
Are floor graphics slip-resistant?
Yes — that's the key difference from wall or window film. Every floor graphic we install is finished with a textured, slip-resistant over-laminate built for walking surfaces. It adds traction and protects the print from scuffs and traffic.
What floor surfaces can you apply graphics to?
Most clean, sealed, smooth-to-lightly-textured floors take graphics well — sealed concrete, polished tile, vinyl plank, terrazzo, and short-pile commercial carpet (with the right film). Rough, unsealed, or freshly coated floors hold film poorly, so we check the surface during the quote and match the adhesive to it.
Will floor graphics come up cleanly, or leave residue?
On a healthy, sealed floor our films are designed to remove cleanly. For events and promotions we use short-term film built for a clean peel. On fresh sealer or coatings that haven't fully cured, removal can lift finish — so we flag it before we start and pick the material accordingly.
How long does a floor-graphics project take?
A single decal or a small set is usually a few days from approved proof to install. Larger directional systems or a full facility's safety markings take longer to design and produce. We give you a real timeline with the quote — and nothing prints until you approve the proof.
Related
Brand the whole space, not just the floor.
Floor graphics work hardest alongside the surfaces around them. Explore the rest of our environmental work — or tie it together with matching exterior and interior signage.
Have a floor that should be working harder?
Send us the space — retail, event, or facility — and we'll come back with a custom plan and quote, designed in-house and proofed before anything is printed.
Designed in-house in Plymouth, IN · serving Northern Indiana & Michiana · 5.0★ / 109 Google reviews